Radiation protection testing (industrial)
1. Project introduction
According to the regulations on the safety and protection of radioisotopes and radiation devices (No. 449 of the State Council), the law on the prevention and control of occupational diseases and relevant standards, the radiation level in the radiation workplace shall be tested and evaluated, so that the user can understand the radiation level in the radiation workplace and protect the radiation workers from unnecessary exposure.
2. Scope of services:
(1) Industrial X-ray testing radiation protection testing
(2) Industry γ Radiographic testing and radiation protection testing
(3) Industry γ X-ray CT radiation protection detection
(4) Radiation protection detection of industrial accelerator
(5) Radiation protection detection of X-ray baggage inspection system
(6) Detection of radiation health protection caused by sealed radioactive sources
(7) Radiation protection of other workplace facilities
3. Report time
After completing the on-site inspection, the inspection report shall be issued within 8 working days.
4. Confidentiality commitment
The test report is only provided to the entrusting party and the competent health department, and will not be disclosed to any third party without the consent of the entrusting party, nor will it be used as publicity materials.
5. Test standard
(1) Basic standard for protection against ionizing radiation and safety of radiation sources (GB 18871-2002)
(2) Sealed radioactive source and seal γ Radiological health protection standard for radioactive source containers (GBZ 114-2006)
(3) Hygienic protection standard for X-ray diffractometer and fluorescence analyzer (GBZ 115-2002)
(4) Radiation protection requirements for industrial X-ray flaw detection (GBZ 117-2015)
(5) Radiological protection requirements for instruments containing sealed sources (GBZ 125-2009)
(6) Hygienic protection standard for X-ray baggage inspection system (GBZ 127-2002)
(7) Industry γ Radiation protection standard for radiographic testing (GBZ 132-2008)
（8） γ Radiological protection standard for industrial CT (GBZ 175-2006)
